The guideline can help you avoid building Construction

A brick wall can be an terrible accent for your yard or an effective way to add an atmosphere of peace in your garden. Although they look attractive, they are extremely durable once they are completed, as they will not be prone to cracks or cracks that block walls made of cement may. Bricks are designed to be placed against a wall that is already in place therefore if you intend to construct a brick wall, it shouldn’t be too huge. Many people hire expensive builders to build even the smallest of brick walks to their houses, but using the guideline can help you avoid building a brick wall and will provide an exciting home design to DIYers.

There are a variety of designs that brick walls could be built in. The most well-known can be described as the run bond, or the manner in which each successive row is Construction Altesse placed in the middle of the row and ends in the middle. There is some other types of herringbone diagonal herringbone, the basket weave Half basket weave. In this guide, the method to be discussed would be called that of the Jack on Jack, where the blocks are placed right on top of each another.

Tools and materials that are required

The building materials required to construct brick walls are the following:

CementBricks (the amount of bricks required is contingent on the length and wideness of wall)
Measuring tape
Tool for leveling


Step one:
Determine the dimensions of the wall that you would like to construct, including both in height and length.

Step two:
Build the base of concrete of the wall. This will make sure that the wall is smooth after the wall is constructed. Mix the concrete according to the directions in the bag and lay it out over the area which will serve to form the base to the wall. It’s okay that the width of your base appears uneven since you can put up a layer of earth once the wall is completed. Allow the concrete completely dry that will take at most one day.

Step three:
After the concrete is dry Once the concrete has dried, trace how long the walls are using chalk or a straight edge, like a piece of wood. This can be used as a reference point to place the bricks in the initial layer.

Step four:
Begin building the wall starting beginning from the left side. Apply a new, thick layer of cement wet over the dry wall base using the trowel. Spread the cement using an regular back and forth movement.

Lay down the first layer of bricks in a row, moving between left and right, not making space between the bricks. The subsequent layers will be joined or have a gap between the bricks which can be filled up with cement.

Step five:
By using the leveling tool, you can ensure the first layer of bricks is level to the best it can be. The cement should provide an degree of mobility for the bricks that are not placed correctly. Bricks that are not even can be moved to create an even entire length. Take out the cement that has been pressed into the sides by using a trowel before using it for subsequent bricks to be erected.

Step six:
Repeat the steps four and five again until the maximum height of the wall that you are creating.

Tips and Advice
Make sure to consult your local building agency prior to building the brick wall. A lot of laws allow for small walls (under 3 feet tall) without the need to submit a permit application.

Make sure to keep the bricks you’ll be working using in a wheel-barrow to your left. So, they’re at your fingertips and are easily moved when you work along the wall.

Leave a Comment